#1
| |||
| |||
Idec modbus rtu |
#3
| |||
| |||
Re: idec modbus rtu
The IDEC corporation is provides Modbus communications. This is the most common protocol in industrial automation. With Modbus TCP Client and Server standard in FT1A SmartAXIS, connecting to SCADA systems or communicating with other devices such as VFD are a snap. Modbus RTU using RS232C/RS485 adapter is also supported. The embedded I/O on the FT1A SmartAXIS can be configured as 0-10V analog inputs with 10-bit 0-1000 resolution. Up to 8 analog inputs (depending on the model) can be configured. This reduces the cost of adding additional analog modules. Manual of IDEC for Modbus communications RTU idec.com/language/chinese_s/AO/FC9Y-B1730.pdf The data can be Read/Written by the following Modbus functions: Functions for reading: 01-Read Coil Status (Read Output Bits) 02-Read Input Status (Read Input Bits) 03-Read Holding Registers (Read Output Registers) 04-Read Input Registers Functions for writing: 05-Force Single Coil (Write 1 Bit) 15-Force Multiple Coils (Write n Bits) 16-Preset Multiple Registers (Write n Registers) USB port can support: Communication Type USB2.0 Full speed, CDC class Communication Functions Capable of maintenance communication with a PC, program downloads via USB power Connector USB mini-B Isolation between Internal Circuit Not isolated Contact to: IDEC Elektrotechnik GmbH Heselstuecken 8, 22453 Hamburg, Germany Tel: +49-40-253054-0 Fax: +49-40-253054-24 |