#1
| |||
| |||
Download SSC Junior Engineer Solved Paper |
#3
| |||
| |||
Re: download ssc junior engineer solved paper
As you want here I am giving below SSC Junior Engineer Solved Paper on your demand : Which of the following represent the crushing strength (MPa) for the good quality stone that are used in the construction of buildings? Options: 1) Less than 20 2) 20 to 60 3) 60 to 80 4) Greater than 100 Correct Answer: Greater than 100 Which of the following is examined to determine the age of timber? Options: 1) Annular ring 2) Sapwood 3) Pith 4) Timber defects Correct Answer: Annular ring Which of the following is determined with the help of Le Chatelier’s device? Options: 1) Abrasion resistance 2) Chemical resistance 3) Soundness 4) Strength Correct Answer: Soundness The type of mortar which is used for the construction works carried out in water-logged area is _____. Options: 1) cement mortar 2) loose mortar 3) mortar of very low consistency 4) mortar having high w/c ratio Correct Answer: cement mortar For M 25 grade concrete, the split tensile strength in terms of percentage of its compressive strength is _____. Options: 1) 7 to 11% 2) 18 to 28% 3) 28 to 38% 4) 38 to 48% Correct Answer: 7 to 11% Distempers are generally used to coat _____. Options: 1) compound wall 2) external concrete surfaces 3) interior surface which are not exposed to environment 4) wood works Correct Answer: interior surface which are not exposed to environment Which of the following is commonly used as retarder in cement? Options: 1) Calcium sulphate 2) Gypsum 3) Potassium carbide 4) Sodium chloride Correct Answer: Gypsum In the process of hydration of OPC, to complete all chemical reaction, the water requirement (expressed as the percentage of cement) is _____. Options: 1) 5 to 8% 2) 8 to 16% 3) 20 to 25% 4) 35 to 45% Correct Answer: 20 to 25% The slump test is performed to check the _____. Options: 1) presence of water in cement 2) ratio of concrete ingredients 3) temperature resistance 4) workability of concrete Correct Answer: workability of concrete The reason behind the low expansion and shrinkage of the plywood is _____. Options: 1) plies are placed at the right angles with each other 2) they are glued under the high pressure 3) they are held in the position with the help of adhesives 4) they are prepared with the help of veneers Correct Answer: plies are placed at the right angles with each other SSC Junior Engineer Solved Paper SSC Junior Engineer Solved Paper drive.google.com/file/d/0BzlPhW-FLc1bdVJTc2FjZmF5Nm8/view |
|